Finally ready to cleco and rivet the HS skins, so a couple of hundred clecos later...

Skins laid over frame for clecoing.
Skins laid over frame for clecoing.

More seems to be better in terms of alignment.

Skins laid over frame for clecoing.
Skins laid over frame for clecoing.
Looks good.
Looks good.
First flush rivets satisfying after all the prep.
First flush rivets satisfying after all the prep.
First side all done.
First side all done.
Trying out the new Wifi endoscope. Clecos left, rivet shop heads right.
Trying out the new Wifi endoscope. Clecos left, rivet shop heads right.
All done!
All done!

And with that the first piece of the plane is done! I'm still waiting for my grommet edging for the trim servo wire which can be easily fitted at the rear, and and some point I will need to fill the rivet heads, but very happy with how it has come out.

Now onto the VS!